If you have more questions or want more details please email : firstname.lastname@example.org .
Hi, I'm selling my personal frame off resto-mod Bronco. I purchased this for the sole purpose to build an
incredible show car and weekend driver. The restoration took almost two years and no expense spared. The body was
removed and the entire bronco taken apart. The body was blasted and the panels that needed to be replaced were. Not
necessarily from any issues but wanted to have the best canvas to start with. The body was then sealed and sent to
the body shop for paint. There was over 120 hours spent on making sure that the Lamborghini paint was going to be
prefect. The under side was coated with a bedliner type paint. The frame was sent to blast as well and was painted
with a frame gloss black paint. A disc brake conversion and new brake and fuel lines were installed as well as all
body mounts, shocks, gas tank and skid plate, springs (3 1/2), bumpers and t-case mount. The top was also blasted
sealed and painted and installed all new glass, seals, shocks, and hardware. Once the body was painted is was
placed back on the frame for final assembly. I installed a brand new create 302 and every nut and bolt was
replaced. The engine has new valve covers, manifold, ignition, oil pan, carb, plug wires, fuel pump, water pump,
fan, radiator, radiator hoses, belts alternator, and power steering pump. I also had a custom intake done so that
there was no clearance issues with the new factory hood. The transmission shifter cane was customized and installed
to allow the np435 to clear with a very clean look. The interior was completely insulated and all new carpet was
installed. 4 speakers were installed as well as an amp that allows you to play your phone through the speakers with
no head unit. A new console was installed and custom switch panel with push button start was fabricated to be
locked into the console for parking and storage. All new front and rear seats were installed along with new trim
and seat brackets. Racing seat belts were installed for the front seats. The dash was custom made for the auto
meter gauges. All new column, steering wheel, intermediate steering shaft, pedals, and dash were installed. The
wiring was a new kit and was made with custom hidden fuse box. All wiring was done, terminated, and loomed. New led
tail lights. The all new windshield, seals, door seals, inner door mechanics, door panels, door glass, mirrors,
handles, hinges and latches were installed. A custom roll cage was built, powder coated and installed.
Almost every single nut or bolt was replaced with ford bronco specific hardware. A custom dual flow master exhaust
All new driveshafts, joints and hardware
Basically everything is new
I am not a company that built this as a cookie cutter for profit. This bronco was built as a 1 off custom build for
my personal collection.
Before delivery the bronco will be sent out for polishing, break in oil change, once over on all bolts to ensure
its perfect. There was a couple small things that need touched up from the final assembly. I have put roughly 60
miles on it sense it was completed. It is absolutely incredible to drive. Life has changed in the last two years
and I can no longer keep it. If the bronco doesn't sell for what the market dictates for a build like this then it
will wait to be sold at either Barrett Jackson or Mecum later this year. Thank you for looking and let me know if
you have any questions.
I am located in Northern California and buyer is responsible for pickup. I will help facilitate though.